ABB ACS355 series, Quick Start Up Manual

Page: 15 / 139

15
ACS355 Minimum required parameter settings for PROFINET
The minimum required parameter settings are based on factory default settings.
Parameter Description Setting Comment
98.02 COMM PROT
SEL EXT FBA Activates fieldbus module
51.01 FBA A type Ethernet Fieldbus type
51.02 Protocol/Profile PNIO ABB Pro (11) Communication profile ABB drives
51.04 IP Configuration Static (0) -
51.05 ...
51.08 IP address 192.xxx.xx.xx or any other
required IP address. -
51.09 Subnet CDR 24 24 For subnet mask 255.255.255.0
51.27 FBA PAR
REFRESH REFRESH Updates fieldbus settings (groups 51 to 55)
10.01 EXT1
COMMANDS COMM Fieldbus interface as a source for start and
stop.
11.03 REF1 SELECT COMM Fieldbus interface as a source for speed
reference
16.04 FAULT RESET
SEL COMM Fieldbus interface as a source for fault
reset
(11.05) REF1 MAX [Scale max] Max speed/frequency scaling value (used
in function block/visualization input
SPEED_REF_MAX ). Must be less or equal
to drive parameter max speed/frequency.
ACS355 More parameters read from drive to PLC (optional)
Parameter Description Setting Comment
54.03
…
54.10
Actual value or
parameter of drive GGii GG = parameter group, ii = parameter index
Example, 0104 = actual current; 0145 = motor temp
51.27 FBA PAR
REFRESH REFRESH Updates fieldbus settings (groups 51 to 55)