ABB ACS2000 AFE 1MVA, User Manual

Page: 148 / 177

CHAPTER 9 – CDP CONTROL PANEL 148
—
9.10 Operational commands
For instructions on how to start and stop the drive system from the
CDP control panel, see
8.6 Starting the drive
and
8.7 Stopping the drive
.
9.10.1 Setting the direction of rotation
Setting the direction of rotation from the CDP con-
trol panel is possible in:
• Local control mode L
• Remote control mode R
The arrow on the display indicates the direction of
rotation:
• When the motor is running, the arrow indicates
the actual direction.
• When the motor is not running, the arrow indi-
cates the preselected direction.
To set the direction of rotation, press the forward
or backward key.
If you change the direction while the motor is run-
ning, the motor automatically ramps down to zero
speed and re-accelerates in the opposite direction
to the preset speed. The arrow changes at zero
speed.
9.10.2 Entering a reference value
Entering a reference value from the CDP control
panel is possible in:
• Local control mode L
• Remote control mode R
1. Press a mode selection key.:
2. To enter the reference value input mode, press
the REF key.
3. To change the reference value, press the corre-
sponding fast or slow navigation key.
4. To exit the reference value input mode, press a
mode selection key.
1 L -> 600.0 rpm
StateINU
MOTOR SP
POWER
ReadyRun
600.00 rpm
75.0 kW
1 L <- 600.0 rpm
StateINU
MOTOR SP
POWER
ReadyRun
600.00 rpm
75.0 kW
1 L -> 600.0 rpm
StateINU
MOTOR SP
POWER
ReadyRun
600.00 rpm
75.0 kW
0
1 L -> [600.0 rpm]
StateINU
MOTOR SP
POWER
ReadyRun
600.00 rpm
75.0 kW
0
1 L -> [550.0 rpm]
StateINU
MOTOR SP
POWER
ReadyRun
600.00 rpm
75.0 kW
0
1 L -> 550.0 rpm
StateINU
MOTOR SP
POWER
ReadyRun
550.00 rpm
75.0 kW
0