ABB ACH550 series, Installation Manual

Page: 10 / 42

Introduction to this manual
10
Router placement in the MS/TP network
In this manual, it is assumed and recommended that you place the
router module in an ACH550 device located at one end of the MS/
TP network.
The wiring starts with the ACH550 drive (the first end of the
segment), continues in the drive to the router module and then to
the next stations on the MS/TP segment.
Note: T connections are not allowed in MS/TP.
For more information, see RBIP-01 Router and ACH550 Drive
manuals . By default, the documents are stored in electronic format
in the router module’s web server. The cover page of ACH550
BACnet Protocol Manual (3AUA0000004591 [English]) shows a
connection example of ACH550 drives in BACnet. See also
Connection examples on page 37.
Router module configuration
The RBIP-01 BACnet/IP Router Module provides an integrated
web server for easy configuration. This installation manual
describes all necessary steps to access the web server.
ACH550
RBIP-01 ACH550 ACH550 ACH550 ACH550