manualshive.com logo in svg

ABB ACF-NT, Operator'S Manual

Share
Download
ABB ACF-NT Operator'S Manual Download Page 11

 

42/23-572 EN Rev. 5 

Operator’s Manual ACF-NT, ACF-NT V0309 

11 

Chapter 2 

Operation 

 

Display/Control Unit 

  

Figure 1 

 
Display/Control Unit 

Status LED’s

Numeric Keypad

Softkeys

Cancel Keys

  

Status LED’s 

 

Green LED:  The power supply is on. 

  

 

Yellow LED:  The “Maintenance Request” status signal is on. The measured value 

is valid. 

  

 

Red LED: 

The “Error” status signal is on. The measured value is no longer valid. 

  

Cancel Keys 

 

Allows the operator to cancel a function or menu item and to return to the 
previous menu level. 
  

 

Allows the operator to cancel a function or menu item and to return to the 
measured value display in measurement mode. 
  

 

Only entries confirmed with

 ENTER 

are stored; unconfirmed items are not 

accepted. 

  

Softkeys 

 

Allows the operator to scroll to the next display “page”. This key only allows 
forward scrolling. 
  

 

Appears in measurement mode if an “Error” or “Maintenance request” condition 
arises. This key allows the operator to call up the status message log and view the 
status messages. The operator can also call up a detailed display for any message 
in the log. 

  

Summary of Contents for ACF-NT











































Reviews:

No comments

Brands by name

Popular brands

Load more brands