NOTICE!
Use of suitable enclosure
The devices must be mounted in a control cabinet that ensures compliance with
the specified environmental conditions.
Cleaning instructions
Do not use cleaning agent for cleaning the device.
Use a damp cloth instead.
Connection plans and a user program must be created so that no dangerous situations can
occur during normal operation or failure.
The application must be tested to ensure that no dangerous situations can occur during opera-
tion.
Do not operate devices outside of the specified, technical data!
Trouble-free functioning cannot be ensured outside of the specified data.
NOTICE!
PLC damage due to missing grounding
–
Make sure to ground the devices.
–
The grounding (switch cabinet grounding) is supplied both by the mains
connection (or 24 V supply voltage) and via the DIN rail. The DIN rail
must be connected to ground before power is supplied to the device. The
grounding may be removed only if it is certain that no more power is being
supplied to the control system.
–
In case of screw mounting, grounding must be ensured by the screws.
CAUTION!
Do not obstruct the ventilation for cooling!
The ventilation slots on the upper and lower sides of the devices must not be
covered.
CAUTION!
Run signal and power wiring separately!
Signal and supply lines (power cables) must be laid out so that no malfunctions
due to capacitive and inductive interference can occur (EMC).
WARNING!
Warning sign on the module!
This indicates that dangerous voltages may be present or that surfaces may
have dangerous temperatures.
Safety instructions
2023/03/03
3ADR011074, 1, en_US
9