5.
Select folder
“MEMORY CARD”
.
ð
The "MEMORY CARD" structure has been created and the firmware and application
have been exported.
The created "MEMORY CARD" folder does not contain user data,
remanent data, config data, safety PLC power dip data and safety
PLC password.
Add this data if required by the used application.
6.
Copy all subfolders and files of the "MEMORY CARD" folder to a memory card.
The copy process can be performed with the Automation Builder software with the
memory card inserted in the processor module or with the PC with a suitable memory
card slot.
1.
Insert memory card into the processor module.
2.
Connect the PC to the processor module with an Ethernet cable.
3.
In Automation Builder, log-in to the processor module.
4.
Double-click on the processor module in the device tree and select
“Files”
.
Copy process
with Automation
Builder software
Appendix
PLC firmware/application update via memory card > Preparation of memory card
2023/03/03
3ADR011074, 1, en_US
110