4
…2
MECHANICAL INSTALLATION
Position ‘U’ bolts on pipe
Position plates over ‘U’ bolts
Secure transmitter to mounting plate
Secure plates
1
2
3
4
191 (7.52)
12 (0.47)
Panel Cut-out
96 (3.78)
96
(3.78)
+0.8
–0
92
(3.62 )
+0.03
–0
+0.8
–0
92
(3.62 )
+0.03
–0
Dimensions in mm (in)
Cut a hole in the panel (see Fig. 2.5 for dimensions).
Instruments may be close stacked to DIN 43835.
Insert the instrument into the
panel cut-out.
Refit the panel clamps to the case, ensuring
that the panel clamp anchors are located
correctly in their slot.
Secure the instrument by
tightening the panel clamp
retaining screws.
Loosen the retaining screw
on each panel clamp.
Remove the panel clamp and
anchors from the instrument case.
4
5
6
1
3
2
3
2.2.2
Panel-mounted Instrument – Figs 2.5 and 2.6
Fig. 2.4 Pipe Mounting
Fig. 2.5 Overall Dimensions
Fig. 2.6 Panel Mounting
…2.2.1
Wall-mounted Instrument – Fig 2.4
