Operating Instructions
ABB-Welcome
Configuration for Telephone
Gateway
Operating Instructions |V1.0
— 37 —
4. Select a Telephone Gateway device in the list, and input the password. Default password:1234.
Fig. 26
5. If the password is correct, it will display as follows:
Fig. 27
No.
Function
1
Click "Edit" to change the password, all passwords are 4 digits and plain code
2
Installer can select "Enable" or "Disable" for Direct-accept from the list
3
Installer can Enable/Disable "Call Divert for All Indoor Stations"
4
This Admin Password is used when user logins TGW
5
Installer can edit Default Phone Num ber directly with m aximum 16 digits
6
Installer can Enable/Disable "Indoor Station PIN Active for all Indoor Stations"
7
All Indoor Station numbers are listed from 1 to 250
8
Installer can select "Yes" or "No" from "Existed" according to actual installation
a.
If "Yes" is selected, all param eters on its right can be edited
b.
If "No" is selected, all param eters on its right is deleted, which m eans this Indoor Station is deleted
from the Indoor Station address.
9
Installer can select "Enable" or "Disable" from "Indoor Station PIN Active"
10
Installer can select "Default" or "Primary" or "Secondary" from "Call Divert Num ber Active"
11
Installer can edit Prim ary and Secondary Phone Number, with m aximum phone number is 16 digits
12
Installer can edit Indoor Station PIN, PIN is 4 digits and plain code
13
Click "Export", all current parameters of the Telephone Gateway are exported to *.txt. If the installer did
modification but didn't click "Send", then click "Export", the original parameters are exported.