6.0 MAINTENANCE
6.1 General
Except for an occasional performance verification check, there is no required routine maintenance
for the Model 10D1476. The Flowmeter body is of all welded construction. In the event a malfunction
occurs in the Flowmeter body, the meter body must be replaced. If supplied, the integrally mounted
Signal Converter assembly is removable.
The manufacturer offers a Repair/Exchange Program to facilitate replacement of a defective Meter or
Converter. If the equipment is beyond the warranty limit, under this program a fixed price will be
charged to the account of the Buyer for replacement of defective equipment with appropriate credit
issued when the repairable unit is received by the manufacturer (charges prepaid). The equipment
available under this program is as follows:
•
the complete Flowmeter with integrally mounted Signal Converter and installation
hardware
•
the Flowmeter and primary board, without the Signal Converter
•
the Signal Converter assembly
WARNING
All Flowmeters and/or Signal Converters being
returned to the manufacturer for repair must be free of
any hazardous materials (acids, alkalis, solvents, etc.).
A Material Safety Data Sheet (MSDS) for all process
liquids must accompany returned equipment. Contact
the manufacturer for authorization prior to returning
equipment.
NOTE
Operation and maintenance procedures for the Signal Converter are pro-
vided in the Instruction Bulletin supplied with the Signal Converter.
When communicating with the manufacturer in regard to replacement of a complete Flowmeter (with
integral Converter assembly), the Flowmeter body, or the Signal Converter, it is important to refer to
the complete instrument serial number to assure that the correct replacement will be supplied. The
necessary information is provided on the manufacturing specification sheet supplied with the Flow-
meter, and on the Flowmeter data tag.
10D1476 K-MAG MAGNETIC FLOWMETER INSTRUCTION MANUAL
6-1
