ab mini CryptoBox 500HD User Manual Download Page 21

Page: 21 / 56

antenna.

Ø

Set East Limit

You can set the maximum motor limit for both

East

to prevent damage to the

antenna.

Ø

Disable Limit

Disable West limit and East limit.

Ø

Go to X.X

Press

button to move the dish to

the

USALS

Setup

Tip:

Before you use

USALS

, you should go to Main

Menu

→

INSTALLATION

→

USALS

Setup to set you local position firstly.

4.3 Fast scan

To fast search channels by different providers base on Astar (19.2) satellite and

the 12515 transponders.

4.4 Factory Default

You can restore the product to the factory default and you can also setup it

according to the wizard.

Warning:

Please note that once you perform

Factory Default all

, all data and

settings will be deleted.

Menu->INSTALLTION

Factory Default

2. Input the password.

3. Highlight the option you want and press the

button to execute it.

Summary of Contents for mini CryptoBox 500HD

























































Search results

Summary of Contents for mini CryptoBox 500HD

Reviews:

Related manuals for mini CryptoBox 500HD

Brands by name

Popular brands

ab mini CryptoBox 500HD, User Manual

Search results

Summary of Contents for mini CryptoBox 500HD

Reviews:

Related manuals for mini CryptoBox 500HD

Brands by name

Popular brands