3
NOTE:
Advises you of information or
instructions vital to the operation or
maintenance of the equipment.
WARNING:
Read all safety
warnings and all instructions.
Failure to follow the warnings and
instructions may result in electric
shock, fire and/or serious injury.
GENERAL POWER TOOL
SAFETY WARNINGS
WARNING:
Read the
user’s manual and follow all
warnings and safety instructions.
Failure to do so can result in electric
shock, fire and/or serious injury to the
operator and/or bystanders
and
damage to property
. Make sure that
you are familiar with the controls and
properly operate the product.
Working Area Safety
a) Keep work area clean and well lit.
Cluttered or dark areas invite
accidents.Only use the product in
daylight or good artificial light.
b)
))
Do not operate the
product in explosive
atmospheres, such as
in the presence of flammable liquids,
gases or dust.The product create sparks
which may ignite the dust or fumes.
c) Thoroughly inspect the area where
the product is to be used and remove
all objects which can be thrown by the
product.
d) Mantain a minimun clearance of
10m from current-carrying lines.
Life-threatening danger form electric
shock.
e) When work is to be performed
simultaneously by two or more
persons, always check for the
presence and location of others so as
maintain a distance between each
person sufficient to ensure safety.
Electrical Safety
1. Do not expose the product to rain or
wet conditions. Water entering a
power tool will increase the risk of
electric shock.
2. Do not use the power tool if the
switch does not turn it on and off. Any
power tool that cannot be controlled
with the switch is dangerous and must
be repaired.
3. Power tool plugs must match the
outlet. Never modify the plug in any
way. Do not use any adapter plugs with
earthed (grounded) the product.
Unmodified plugs and matching
outlets will reduce risk of electric
shock.
4. Avoid body contact with earthed or
grounded surfaces such as pipes,
radiators, wire fences,ranges and
refrigerators. There is an increased risk
of electric shock if your body is
earthed or grounded.
5. Always hook the cable to the hook
provided on the product.
6. Do not abuse the cord. Never pull,
unplug, or carry the unit by a cord.
Keep cords away from heat, oil, water,
sharp edges, jagged areas and moving
objects. Always grasp the plug when
disconnecting a cord.Never cut the
cable.Damaged or entangled cords
increase the risk of electric shock.
7. If operating a power tool in a damp
location is unavoidable, use a ground
