32
8. Reinstall the air filter element, replace
the air filter cover in its original position.
9. Reinstall the access panel and tighten
the screw.
1) put the screw #1 & 4 in the access
panel, but donot tighten it fully.
2) put the screw #3 & 6 in the access
panel, but donot tighten it fully.
3) put the screw #2 & 5 in the access
panel, but donot tighten it fully.
4) tighten all screws well
CAUTION:
Be sure the foam element sealing
surface to match the air filter case, so
there is no air leak.
The engine should never run without
the element; excessive piston and
cylinder wear may result.
Never use solvent while smoking or in
the vicinity of an open flame.
Running the engine with dirty,
damaged or missing air cleaner
element will cause the engine to wear
out prematurely.
MUFFLER SCREEN AND SPARK
ARRESTER
WARNING:
The engine and
muffler will be very hot after
the engine has been run. Avoid
touching the engine and muffler while
they are still hot with any part of your
body or clothing during inspection or
repair.
1.
Remove the
screws ①
8pcs, and then
pull outward on the areas of the
black
cover
②.
Summary of Contents for A112004
Page 39: ...39 WIRING DIAGRAM...
