8.3.4
Charging in a vehicle
1.
Put the charger’s plug
either into the socket on the battery pack or
the socket on the s-max (please see chapter 8.3.2).
2.
Then put the plug
of the automatic charger into the 230 V socket
of
the voltage converter.
3.
Put the 12 V plug
into the cigarette lighter.
4.
Turn on the voltage converter by pushing the switch and the battery
pack is being charged.
A control light (LED) on the charger and a beeper in the voltage converter al-
low the charging process to be monitored.
Signals of the charger and the voltage converter
8.4
Fuses
The battery pack is equipped with a 30 A fuse protected by a cover
.
F
You may not mend or by-pass a defect fuse. Always replace it with an
identical one of the same amperage.
F
AAT Alber Antriebstechnik GmbH could offer you replacements of
the fuses!
F
Before you exchange the fuses, please remove the charger from the
battery pack
!
To exchange the fuse, remove the cover
and pull out the fuse
; insert the
new one and replace the cover.
F
Should your fuses burn out frequently, please contact AAT Alber
Antriebstechnik GmbH or your authorized dealer.
36
S
-max
charger
LED, orange
batteries are being charged
charger
LED, green
batteries are charged, retaining of the charge
voltage converter
beeping
12 V supply is low
4
3
