6.2.3
Single step mode
Should you choose to turn off the single step mode manually you can do so
by pressing the key
on the membrane keypad. The yellow LED above the
pictogram with the continuous arrow
lights up as soon as you turn off the
single step mode.
F
Every time you turn on the s-max, the single step mode is automati-
cally activated.
If you activate the ON/OFF switch in that mode, the device will climb only
one step at a time. The climbing system stops in the correct position.
The climbing mechanism cannot unintentionally be activated. You can take
your time to move the main wheels to the next step's edge.
To continue climbing you simply release the UP/DOWN switch and then
press it again.
6.3
Climber
The climber
(see picture) must be pulled in to topmost position by means
of the UP/DOWN switch if you want to:
•
drive on level ground and on slopes
•
check the safety brakes
•
begin climbing upstairs or downstairs
However, you need to fold out the climber by activating the UP/DOWN
switch, direction up, whenever a person takes a seat in the s-max, so the de-
vice is supported by the climber (please also see chapter 6.6.1).
19
S
-max
