The first interval is finished when the main wheels
touch down on the next
higher step and resume the load of the climber
.
The second interval begins by pulling in the climber
. It is finished when
the climber reaches its topmost position.
Because the s-max is always pulled slightly backward, it rolls automatically
to the next step and reaches the initial position again - both main wheels
touch the next step
.
Since the single step mode is activated each time before you turn on the
s-max, the climbing process ends here. To resume climbing, you need to
press the UP/DOWN switch once again, direction "UP".
At this point the climbing process repeats itself as described in point 7.
27
S
-max
