7
Accessories
7.1
Battery pack
The s-max works with batteries and is delivered with one battery pack with
charging electronics and safety latch.
If you use the s-max often, i.e. if there are not sufficient breaks for the batte-
ries to be recharged, we recommend you obtain an additional battery pack
(available as an accessory). In such case one battery pack is in use while the
other is being recharged at the same time.
F
If you do not use the s-max both battery packs should be connected
to the charger to increase their durability (see chapter 8.3.2).
F
Please exclusively use the AAT Alber Antriebstechnik GmbH charger
to charge your battery pack.
7.1.1
Exchange battery pack
1.
Turn off the s-max using the ON/OFF switch.
2.
Press the release button
on top of the climbing unit's housing
until it disengages. Now you pull out the battery pack at its handle
from its housing.
3.
Push the other fully charged battery pack into its housing. This
establishes the power connection and locks the battery pack.
F
The battery packs should always be connected to the charger to ex-
tend its durability (see chapter 8.3.2).
F
Please exclusively use the AAT Alber Antriebstechnik GmbH charger
to charge your battery pack.
7.2
Voltage converter for your vehicle
We recommend the voltage converter for your vehicle, if you transport the
stairclimber s-max in your car. The AAT voltage converter is designed for a
12 V electrical system. This voltage converter transforms 12 V / 24 V direct
current (D.C.) into 230 V alternating current (A.C.)
The plug of the voltage converter
is plugged into the cigarette lighter in
your car or into the socket of the supply system. The automatic charger’s
230 V connector is plugged into the socket
of the converter.
31
S
-max
4
3
