2.8.1.3
Multi holding device
2
Pull the locking bolt
out sidewise and slide the tilt support
all the way
into the holding
on the max-e. Please note the instructions written on the
tilt supports. The one marked with an “R” ist the tilt support for the right
side, the one marked with an “L” is the one for the left side, so that the dril-
lings for the locking bolts correspond
.
F
Please make sure that the tilt supports are secured in their respective
holding devices. If you can pull them out, they are not secured properly
.
F
Before you start driving make sure that the tilt supports are not jammed
.
F
Please do not drive backwards against a wall with mounted tilt supports
.
F
Please note that no tilt support can secure all potentially difficult situa-
tions, thus avoid any instable situations even with tilt supports
.
To remove them you pull out the locking bolts and take them off.
16
max
-
e
