
33
LED blinks
Types of malfunction
1x
Overloaded
2x
Undervoltage, battery pack empty
3x
Overvoltage
4x
Speed control, UP/DOWN switch, plug-in contacts or suppy line are defective
5x
Malfunction, electronics
6x
Malfunction, electronics
7x
Error, circuit board (FET)
8x
Error, circuit board (Relays)
9x
Error, motor
10x
Error, sensor hollow shaft
(only if ComfortStep is activated)
Problem
Check and potential solution
CR2303 cannot be turned on
Is the helix cable inserted and locked?
No: Insert helix cable into its socket and lock it.
Is the charger connected to the CR2303?
Yes: Disconnect the charging cable.
Are the batteries empty?
Yes: Charge the batteries.
Is the problem still present?
Yes: Contact the manufacturer or the authorized dealer.
CR2303 does not drive
Is the safety chip for the engine immobillizer inserted?
Yes: Contact the manufacturer or the authorized dealer.
Battery pack doesn’t charge
Contact the manufacturer or the authorized dealer.
The housing of the battery pack is
damaged
Contact the manufacturer or the authorized dealer.
Trouble shooting
Turn on the CR2303
»
LEDs are blinking - Contact the manufacturer or your authorized dealer!
Malfunction codes