Aastra NeXspan C, Installation Manual

Page: 50 / 196

Page 50 01/2007 AMT/PTD/PBX/0020/2/4/EN
• XX: RPN (radio part number)
Indicates the number of base station used by the mobile
• F: Frequency
Indicates the frequency used by the mobile (0 …. 9)
• S: Slot number
Indicates the slot number used by the mobile ( 0…….b)
• QQ: Quality
Indicates the CRC value (value 40h if there is no degradation, 39h if HO request)
• RR: RSSI
Radio level (Value between 35h and 60h for a Max. signal).
• BSI: Blind Slot Information
12 bits field: 1 bit/slot (1: free, 0: busy)
• AAAA: alarm counter (in alarm mode)
alarm counter (in alarm mode)
• C1C1/R1R1: RPN and RSSI
Indicates best available base station for handover in cell XX
• C2C2/R2R2: RPN and RSSI
Indicates second best available base station for handover in cell XX
• C2C2/R2R2+:
Indicates that on the next page there are more than 3 base stations in cell XX
Use the key to move from one screen to another
• or one arrow indicates that the mobile terminal is in connected mode, two arrows
indicate that the mobile terminal is in a handover phase.
• Indicates that the base station with RPN XX is saturated (4 channels are occupied).
Line 0, comprising 16 characters, is used to display a certain number of statuses:
• A44 0/1:
Indicates whether or not the base station is in recording mode.
Ù