Aastra DT412 User Manual Download

Page: 53 / 166

MD Evolution – Cordless DT412 / DT422 / DT432

During Calls

Press to end the service.

You may then move about freely, then return to the parked call on

any other extension.
Typically, the duration of validity is 3 minutes. If the parked call is

not retrieved within this time frame, it will be disconnected if it is an

internal call or re-directed to an attendant if it is an external

incoming call.
To retrieve a parked call from your extension or a similar idle

extension:

Dial the prefix “10” to access to the call parking service.

Dial the 1 or 2 digit identification code for the parked call.

Press to return to your conversation.

You are connected to the conference.

Notes:

When an external call is either placed on hold or is parked,

the party is then connected to on-hold music, usually

provided by your facility.

The parked call retrieving service may be activated by

dialling the following, from any extension, using the same

sequence: 10 <ID. CODE>.

Of course, your calls may also be subject to parking by a

third party set.

Summary of Contents for DT412






































































































































































Search results

Summary of Contents for DT412

Reviews:

Related manuals for DT412

Brands by name

Popular brands

Aastra DT412, User Manual

Search results

Summary of Contents for DT412

Reviews:

Related manuals for DT412

Brands by name

Popular brands