background image

During Calls

MD Evolution – Cordless DT412 / DT422 / DT432

54

Conversation Recording

If your telephone system is equipped with “Integrated Voice Mail”, 

and you have a “Mailbox”, the conversation recording service 

allows you to record any telephone conversation so that you may 

then subsequently be able to listen to it from your “Mailbox”.
The recorded conversation is then processed just as any voice 

message left in your mailbox.(See section “

Voice Mail Services

” on 

page 73).
To begin recording a conversation, after informing your caller:

#

Simply dial the suffix “#”, assigned to the conversation 
recording service.

Your conversation recording is started; recording time is not limited. 

According to the configuration of your telephone system, an 

intrusion tone may periodically sound, reminding the user that the 

conversation is still being recorded.

Notes:

Recording a conversation without your caller's prior 

consent may be illegal, as may be sending this recording to 

a third party. 

The initiator must absolutely request the caller's consent 

prior to beginning the recording, at the conclusion of the 

recording, and for any subsequent use of the recording. 

Compliance with the law is the exclusive responsibility of the 

user; any violation may be subject to legal action. Neither 

the manufacturer nor the distributor may be held 

responsible for any abusive use of this function by the user, 

or by any other damage that may result.

You may stop the current recording and then re-start it by 

re-starting the entire procedure This service is available for 

a single call in progress, as well as a broker's call, in which 

case you may record each portion of the conversation with 

one or all of your calling parties.

Summary of Contents for DT412







































































































































































Reviews: