1531-DBC 422 02 Uen B3 2013-12-02
66
I
NSTALLATION
7.29 Factory
default
To set the phone to factory default, the following procedure must be
used:
•
Enter administrator mode, 7.30 Administrator mode on page 66.
•
Press the keys C,*,9 for a second.
The following data will be set:
•
Use DHCP
•
Auto detection of protocol, which means that the telephone will use
the protocol H.323 that is defined in the configuration file
•
The phone shall retrieve the IP address to the software server auto-
matically (from DHCP or DNS SRV resource records)
•
Automatic VLAN detection
•
Automatic detection of LAN access control according to
IEEE802.1x
•
User identity and password for LAN access control according to
IEEE802.1x
•
The password is erased
•
The contact list is erased
•
All the numbers associated to function keys are erased
•
All the function keys are placed on the default positions
•
Tone ringer character is set to the default value
•
Increased hearing level is set to standard
7.30 Administrator
mode
The administrator mode is used when IP settings is to be changed.
Normally it is the maintenance personnel that handles the IP settings
and not the end user.
To enter the administrator mode, use the navigation key to get the
settings menu and then press the keys
C
(clear key),
*
and
5
simultane-
ously for one or two seconds. One ringing signal is heard to indicate that
this mode is entered. The administrator mode is valid until exiting from
the
Settings
menu.
