Aastra ATP-CNX-040-01 Administrator'S Manual Download Page 91

Page: 91 / 190

Procedures

ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07

3-37

Configuring the Aastra CNX

Voice over IP/RTP

Under the

Voice over IP

object, click “

RTP

”.

Result:

The RTP attributes display.

Configure the attributes as required.

Click

to save the configuration to the Aastra CNX and to the CompactFlash card.

Step

Action

Attribute

Default

Valid Values/Description

No Voice Path

Teardown

DISABLE

ENABLE

DISABLE

Description

: Specifies whether or not the CNX uses

no voice path teardown for Voice over IP.

Path Teardown Timer

Note

: Enabled only if

“No Voice Path

Teardown” is set to

ENABLE.

10 to 100

Description

: Specifies the period of time, in seconds,

that the Aastra CNX waits before automatically
clearing a call if it receives no voice Real-Time
Transport Control Protocol (RTCP) packets.

Summary of Contents for ATP-CNX-040-01































































































































































































Search results

Summary of Contents for ATP-CNX-040-01

Reviews:

Brands by name

Popular brands

Aastra ATP-CNX-040-01, Administrator'S Manual

Search results

Summary of Contents for ATP-CNX-040-01

Reviews:

Brands by name

Popular brands