Prepare for hardware installation
1-2
ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07
CNX System Administrator Guide
Prepare for hardware installation
What you need for a single installation
•
One Aastra CNX unit
•
One AC power cable
•
One CompactFlash memory card
•
One set of rack mounting brackets with six (6) Phillips head screws
•
Truss head screws (
not provided
)
•
One to four RJ-48C T1/E1 cable(s) (
not provided
)
•
One 9-pin male DB-9 to female DB-9, RS-232 serial cable
•
One or two RJ-45 10/100BaseT Ethernet cable(s) (
not provided
)
•
(Optional) One 9-pin male DB-9 to female DB-25, RS-232 serial cable for
modem connections (
not provided
)
Tools required for rackmount installations
In addition to the parts listed above, the following tools are also required when
installing an Aastra CNX rackmount unit:
•
#2 Phillips screwdriver
•
Torque wrench
•
Nutdriver set
Note:
T1/E1 Ports 1, 2, 3, and 4 are available for the 30, 60, and 120 port
units.
1
