Aastra 9480i CT Series User Manual Download Page 90

Page: 90 / 294

Model 9480i CT IP Phone User Guide

Line Keys and Softkeys

"Do not Disturb" (DND) Key

The IP phones have a feature you can enable called "Do not Disturb (DND). The DND function

allows you to turn "do not disturb" ON and OFF.

If DND is ON, callers calling into the phone hear a busy signal or a message, depending on how

your System Administrator set up the configuration server. The second line on the screen of the

IP phone shows when DND is set.

If the phone shares a line with other phones, only the phone that has DND configured is affected.

You can set DND on the softkeys using the Aastra Web UI only. DND is not configurable from

the IP phone UI.

Configuring a "Do Not Disturb" Key

Use the following procedure to set a key to function as "Do Not Disturb".

Click

Operation->Softkeys and XML

Note:

You can configure DND using the Aastra Web UI only.

Aastra Web UI

Summary of Contents for 9480i CT Series







































































































































































































































































































Search results

Summary of Contents for 9480i CT Series

Reviews:

Related manuals for 9480i CT Series

Brands by name

Popular brands

Aastra 9480i CT Series, User Manual

Search results

Summary of Contents for 9480i CT Series

Reviews:

Related manuals for 9480i CT Series

Brands by name

Popular brands