Aastra 9480i CT Series User Manual Download Page 187

Page: 187 / 294

Model 9480i CT IP Phone User Guide

177

Managing Calls

The following table describes the key and Message Waiting Indicator (MWI) LEDs when you

enable CFWD on the IP Phone.

Key LED Behavior
for All Modes

MWI LED Behavior
for All Modes

CFWD key LED

RED

if CFWD All, CFWD

Busy, or CFWD No Answer is enabled for the
account in focus.

CFWD key LED

OFF

if any CFWD mode is

disabled.

MWI LED

if current account in focus has

CFWD ALL enabled.

MWI LED

OFF

if CFWD All is disabled.

Note:

If you make changes to the configuration for CFWD via the IP Phone UI,

you must refresh the Aastra Web UI screen to see the changes.

Summary of Contents for 9480i CT Series







































































































































































































































































































Search results

Summary of Contents for 9480i CT Series

Reviews:

Related manuals for 9480i CT Series

Brands by name

Popular brands

Aastra 9480i CT Series, User Manual

Search results

Summary of Contents for 9480i CT Series

Reviews:

Related manuals for 9480i CT Series

Brands by name

Popular brands