Aastra 9480i CT Series User Manual Download Page 258

Page: 258 / 294

248

Model 9480i CT IP Phone User Guide

Additional Features

Using Redial Key for “Last Number Redial”

The IP phone has an enhanced redial user interface that allows a user to quickly redial the last

number that was dialed out from the phone. You can:

•

Press the REDIAL button twice to redial the last number dialed.

•

Press the REDIAL button once, scroll the list of numbers, then press the REDIAL button
again to dial the number that displays on the screen.

The “last number redial” feature for the Redial key is static and is not configurable.

Summary of Contents for 9480i CT Series







































































































































































































































































































Search results

Summary of Contents for 9480i CT Series

Reviews:

Related manuals for 9480i CT Series

Brands by name

Popular brands

Aastra 9480i CT Series, User Manual

Search results

Summary of Contents for 9480i CT Series

Reviews:

Related manuals for 9480i CT Series

Brands by name

Popular brands