Aastra 6863i User Manual Download Page 96

Page: 96 / 141

Managing Calls

41-001522-00 REV00 – 04.2014

Configuring a DND Key

To configure a DND key, see the section,

“Do Not Disturb (DND) Key”

page 45

Configuring DND Using the Aastra Web UI

Note:

If there is no

DND

key configured or if it is removed, DND is disabled on the IP phone.

Aastra Web UI

Click on

Basic Settings > Preferences > General

In the

DND Key Mode

field, select a DND mode to use on the phone. Valid values are: Account, Phone (default),

Custom. Default is Phone.

•

Account: Sets DND for a specific account. DND key toggles the account in focus on the phone to on or off.

•

Phone (default): Sets DND on for all accounts on the phone. DND key toggles all accounts on the phone to on or off.

•

Custom: Sets the phone to display custom screens after pressing the DND key that list the account(s) on the phone.
The user can select a specific account for DND, turn DND on for all accounts, or turn DND off for all accounts.

Notes:
•

If there is only one account configured on the phone, then the mode setting is ignored and the phone behaves
as if the mode was set to

Phone.

•

Using the Aastra Web UI, if you change the

DND Key Mode

to Phone, all accounts synchronize to the current

setting of Account 1.

Click

Save Settings

The changes takes affect immediately without a reboot.

Summary of Contents for 6863i














































































































































Search results

Summary of Contents for 6863i

Reviews:

Related manuals for 6863i

Brands by name

Popular brands

Aastra 6863i, User Manual

Search results

Summary of Contents for 6863i

Reviews:

Related manuals for 6863i

Brands by name

Popular brands