Model 6730i IP Phone Installation Guide 9
Installation and Setup
Connecting a Handset
Turn the phone over and locate the handset jack marked
j
. Insert one
end of handset cord into the jack until it clicks into place. Then route the
handset cord through the groove as shown in the illustration below. Attach
the handset to the other end of the handset cord.
Desk or Wall Installation
Install on the Desk
The desk installation for the 6730i IP Phone IP phone consists of two legs
that attach to the back of the phone near the top corners. A total of four
different viewing angles allows users to personalize their phone viewing
preference.
1. Attach each leg by inserting the tabs on the leg into the slots on the bot-
tom of the phone. There are three pair of leg slots on each corner of the
phone; each leg uses two pairs (1&2, or 2&3) giving two leg positions
designating different viewing angles. Furthermore, the legs can be
reversed which offer two additional viewing angles.
2. For a higher viewing angle, use the second and third slots from the top.
3. For a lower viewing angle, use the first and second slots from the top.
To Handset