Connecting the SPECTRAN® V6 with antennas or RF devices
The SPECTRAN
®
V6 provides the following connectors for antennas and/or other RF devices:
Two SMA inputs labeled Rx1 and Rx2 to
connect antennas, generators or other
measurement equipment supporting signal
strengths of up to +25 dBm (Rx2 only
supported on RSA 2000X).
One SMA output labeled Tx to connect
receiving equipment providing signal
strengths of up to +20 dBm (not suppor-
ted on RSA 250X).
RX
TX
REF
One SMB input labeled REF to connect an
external 10 MHz clock signal.
One SMB in/output labeled TRG for
synchronizing device.
One SMB in/output labeled PPM.
One SMB input labeled GPS to connect an
antenna to the integrated GPS receiver
(requires software license).
TRG
PPM
GPS
Antenna
(not included)
„Rx1“ connector
SMA cable
(not included)
„POWR“ connector
„DATA“ connector
In most scenarios, you will only connect the Rx1 input to an antenna (or other device), so your setup will look similar to this:
