![AAQ AutoLift PP609 Installation Manual & Operation Instructions Download Page 5](http://html1.mh-extra.com/html/aaq/autolift-pp609/autolift-pp609_installation-manual-and-operation-instructions_3239073005.webp)
5
4.Assemble the lift
4.1 Notice
4.1.1 Read and understand the equipemt's safety alerts before using the equipment.
4.1.2 Pay attention to protect your hands and feet. The hands and feet must be removed from
the rotating parts. When the equipment falls, remove the feet to avoid being crushed.
4.1.3 Keeping the work site neat, clean, and chaotic workplaces can cause injury.
4.1.4Check the working environment of the equipment, do not expose the equipment to rain, do
not use the equipment in a humid environment, and the equipment area must be well ventilated
and illuminated.
4.1.5 This equipment should only be used by trained personnel. All untrained personnel should
stay away from the work area and do not allow untrained personnel to access and use the
equipment.
4.1.6 Use the quipment in the right way. Please do not modify the equipment with parts not
supplied by the factory.
4.1.7 When lifting or dropping the car, keep away from the working area of the equipment.
4.1.8 If the car on the platform is in a dangerous state, there must be enough shelter space.
4.1.9 Prevent electric shocks. In order to protect the operator, the grounding wire of the
equipment motor must be grounded reliably and must not be connected to other objects.
4.1.10 Warning! The power unit voltage on the equipment is very high. The power must be cut
off before servicing the electrical equipment on the power unit.
。
4.1.11 Pay attention to maintenance. The equipment must be kept clean so that there is a safe
environment. Proper lubrication and maintenance contribute to the reliable use of the
equipment. Handle the machine carefully to prevent injury, especially to prevent it from being
crushed when the device is tipped over.
4.1.12Must keep a clear head. Be alert and alert when working.
4.1.13It is forbidden to remove any parts that involve safety.
4.1.14Maintain the safety locking device
4.1.15 When lifting the equipment, the guarantor is in a safe area.
Summary of Contents for AutoLift PP609
