Page 62
July 2019 – TD 304 OPERATING MANUAL – Doppler Current Profiler Sensor
At first connection with AADI Real-Time Collector
the connection list will be emty. Click on the
New
button in the lower left corner to create a
new connection
NOTE: This only need to be done once. AADI
Real-Time Collector will keep the information for
later use and next time you might select it from
the connection list.
Figure 3-3: AADI Real-Time Collector start up menu
Select
USB
from the
Port Settings
drop down
); and write a name in the
Connection Name
box (for i.e. SeaGuardII). We
recommend using product name and serial
number if you want to connect multiple
instruments to the same software.
Figure 3-4: AADI Real time Collector connection settings
Click on the
Advanced Settings
in the right lower section and select
Connection
on the left side in the next window as
shown below.
The
Advanced Settings
are only accessible to change when the port is closed. If the settings are grey then you first
Open Port / Close Port.
