19
To adjust the clock.
To set the monitor function of A-BPM.
Step 1. If the indication of the display is hidden, press the
START/STOP or EVENT switch to return to the display of
waiting mode.
Step 2. If the mark is shown, press and hold the EVENT switch for
3 seconds or more to suspend A-BPM.
Step 3. While pressing and holding the START/STOP switch,
press and hold the EVENT switch for
6
seconds or more.
Display is displayed on the OLED display.
Step 4. Operation switches are as follows:
Refer to "
8.2.2. The Clock and the Monitor Function of Measurement
"
EVENT switch .................Change the current parameter.
START/STOP switch ......Decision, next item, end of settings.
Summary of Contents for TM-2440
Page 18: ......
Page 32: ...14 4 2 Dimensions 95 Unit mm 24 5 ...
Page 94: ...76 MEMO ...
Page 95: ......