A&D RA3100 Omniace, Simple Instruction Manual

Page: 71 / 76

8.Specifications -8.2.Functional Specifications
1WMPD4004445 71
8.2.10. Interface Specifications
Item Specifications
LAN Supported standard
Connector
Number of ports IEEE802.3 (1000BASE-T, 100BASE-TX, 10BASE-T)
RJ-45
1
USB Supported standard
Connector
Number of ports USB3.0
Type-A
2
SD Supported standard
Connector
Number of ports SD standard (SD/SDHC/SDXC supported)
Slot for SD memory cards
1
COM Supported standard
Connector
Number of ports EIA-574
D-Sub9
1
DVI-D Supported standard
Connector
Number of ports DVI-D (dual link not supported)
DVI-D
1
8.2.11. Communication Setup
Item Specifications
Network Settings IP address setup Select to automatically retrieve or manually set the IP
address.
When manually setting the IP address, the IP address,
subnet mask, and default gateway can be manually set.
IP address Set the IP address.
Subnet mask Set the subnet mask.
Default gateway Set the default gateway.
DNS server address
setup Select to automatically retrieve or manually set the DNS
server.
When manually setting the DNS server the preferred DNS
server and alternate DNS server can be set.
Preferred DNS server
Alternate DNS server Set the preferred DNS server.
Set the alternate DNS server.
RS-232C Settings Baud rate Select the RS-232C baud rate.
300 to 460800 bps
Data bits The RS-232C data bit length, fixed to 8 bits
Stop bits Select the RS-232C stop bits.
Select 1 or 2 bits.
Parity Select the RS-232C parity.
None, odd, even, mark, or space
Flow control Select the RS-232C flow control method.
Select none, XON/XOFF, or hardware (CTS/RTS).