A&D FX-1200CT Instruction Manual Download

Page: 59 / 84

14-2 Connection to a Computer

The FZ-CT

and FX-CT

series balances can be connected to a personal computer using the

RS-232C serial interface. As an option, the FX

–02 USB interface is available to transmit the

balance data to a personal computer.

The FZ-CT

and FX-CT

series balances are a DCE.

Use a straight through cable. If purchasing the RS-232C cable on the market, check the interface
connections and type.

14-3 Using Windows Communication Tools (WinCT)

When Windows is used as an operating system in a personal computer, the WinCT software, that

is downloaded from the A&D website, can be used to transmit the weight data to the personal
computer.

The WinCT has three communication methods: “RsCom”, “RsKey” and “RsWeight”.

RsCom

Can transmit commands to control the balance.

Can make bi-directional communication between the balance and a personal computer using

the RS-232C serial interface.

Can display or store the data using a text file format. Can also print the data using a printer

connected to the personal computer.

When several ports of a personal computer have balances connected, can communicate with

each balance simultaneously.

Can share a personal computer with other application software.

RsKey

Can transmit the weight data output from the balance directly to other application software

such as Microsoft Excel.

Can be used with most application software.

D-Sub 9-pin
Female connector
Inch screw thread

Summary of Contents for FX-1200CT





















































































Search results

Summary of Contents for FX-1200CT

Reviews:

Related manuals for FX-1200CT

Brands by name

Popular brands

A&D FX-1200CT, Instruction Manual

Search results

Summary of Contents for FX-1200CT

Reviews:

Related manuals for FX-1200CT

Brands by name

Popular brands