A&D AD-8922A, Instruction Manual

Page: 12 / 42

10
４
-
２
Function Table
Table 6
Class Item Parameter Description
0
Set 0
When connected to EK-G, EW-G,
FC-
i
, FC-S
i
, FG, FP, FS, FS-KL
HV-G, HV-WP, HW-G or HW-WP.
Disables the AD-8922A keys for use
as a remote display.
1
Set 1
When connected to ET-W, GH, GP,
GX, GX-K, FZ- i , AD-4212C.
2
Set 2
When connected to a GR series
balance.
3
Set 3
When connected to GF, GF-K,
AD-4212A/B, HR, HR- i . EK-H, FX- i
C5et
*
Command set
4
Set 4
When connected to an EK- i /EW- i
series balance.
0
Through mode
Always outputs the data received by
the D-Sub 9-pin connector, to the
DIN 8-pin connector.
1
Key mode 1
Outputs the latest data received by
the D-Sub 9-pin connector, to the
DIN 8-pin connector, when the
AD-8922A PRINT key is pressed.
out
Output mode
2
Key mode 2
Outputs the latest stable data
received by the D-Sub 9-pin
connector, to the DIN 8-pin
connector, when the AD-8922A
PRINT key is pressed.
0
Bar display
Bar display if nothing has been
received for two seconds or more.
Hold
Timeout
1
Hold display
Displays the previous data received
if nothing has been received for two
seconds or more, and turns on the
hold indicator.
0
Not used No buzzer upon data receipt.
1
At intervals
Sounds buzzer when the data is
received with an interval of two
seconds or more.
bep
Data receipt
buzzer
2
Used
Sounds buzzer upon each data
receipt.
-
Not set
0
dpp
Position of
decimal point
6
Set
Sets the decimal at a specific position. When
changing the minimum display digit, pressing
SAMPLE key does not change the decimal
point position. (For details, refer to “9-2”.)
0
No function The SAMPLE key does not function.
fnc
Environment
Display
5apl
Function of the
SAMPLE key
1
Function The SAMPLE key will function.
0
600 bps
1
1200 bps
2 2400 bps
3 4800 bps
4
9600 bps
5if
Serial
interface
bp5
Baud rate
5
19200 bps
Choose a parameter appropriate to
the weighing instrument.
When the AD-8121B compact
printer is to be connected, leave the
factory settings of the AD-8922A as
is and set the weighing instrument.
Factory setting
* See Table 2 in "1-2 Applicable Instruments" to set the command set "
C5et
" of the function setting,
appropriate to the weighing instrument.