A&D AD-4212A, Instruction Manual

Page: 36 / 108

34
Class Item and Parameter Description
5if
Serial
interface
Not displayed
when BCD
output (OP-01)
is installed.
bp5
Baud rate
0
600 bps
1
1200 bps
2
2400 bps
3
4800 bps
4
9600 bps
5
19200 bps
btpr
Data bit, parity bit
0
7 bits, even
1
7 bits, odd
2
8 bits, none
Crlf
Terminator
0
CR LF
CR: ASCII code 0Dh
LF: ASCII code 0Ah
1
CR
type
Data format
0
A&D standard format
Refer to "10-6 Description of
Item "Data Format".
1
DP format
2
KF format
3
MT format
4
NU format
5
CSV format
t-Up
Timeout
0
No limit
Selects the wait time to receive a
command.
1
1 second
erCd
AK, Error code
0
No output
AK: ASCII code 06h
1
Output
Ct5
CTS, RTS control
0
Not used
Controls CTS and RTS.
1
Used
bcd
Displayed only
when BCD
output (OP-01)
is installed.
datp
Data
0
OFF at 1 ON at 0
1
ON at
1
OFF at
0
polp
Polarity
0
OFF at negative ON at positive or zero
1
ON at negative OFF at positive or zero
5tbp
Stability
0
OFF at stabilization indicator ON ON at stabilization indicator OFF
1
ON at stabilization indicator ON OFF at stabilization indicator OFF
0erp
OVER
0
OFF at
e
,
-e
display
1
ON at e , -e display
5trp
STROBE
0
Data refresh completed when ON

OFF
1
Data refresh completed when OFF

ON
5tap
Status
0
OFF when weighing ON when not weighing *4
1
ON when weighing OFF when not weighing *4
Unit
Unit
Refer to “5. WEIGHING UNITS”.
id
ID number setting
Refer to “11. ID NUMBER AND GLP REPORT”.
erfnc
Extended functions
Available only for the AD-4212A series balance when “To use
the extended functions” is selected for the function switch and is
used for special applications.
For details, refer to “20. EXTENDED FUNCTIONS”.
Factory setting
*4 “Not weighing” is a condition that a weight value is not displayed such as re-zero operation or
display-off state.
Caution
The balance may not transmit the data completely at the specified refresh rate, depending on
the baud rate or data added to the weighing data such as time, date or ID number.