A&D AD-4212A, Instruction Manual

Page: 34 / 108

32
Class Item and Parameter Description
Cpout
Comparator
output
Cp-t
Comparator output
setting
0
3-level comparator contact output
Only the AD-4212B series
balance displays this class and
item.
1
5-level comparator contact output
Cp fnc
Comparator
Cp
Comparator mode
0
No comparison
0
: AD-4212B-23
1
: Other models
1
Comparison, excluding “near
zero” when stable or overloaded
2
Comparison, including “near
zero” when stable or overloaded
3
Continuous comparison,
excluding “near zero”
4
Continuous comparison,
including “near zero”
Cp-r *2
Comparison results
0
Not added
Use in A&D standard format.
1
Added
bep
LL buzzer
0
OFF
Displayed only when 5-level
comparator output (
*3
) is selected. 1
ON
bep_
LO buzzer
0
OFF
1
ON
bep-
OK buzzer
0
OFF
1
ON
bep
HI buzzer
0
OFF
1
ON
bep
HH buzzer
0
OFF Displayed only when 5-level
comparator output (
*3
) is selected.
1
ON
Cp HH
Secondary upper limit
Refer to "10-10 Comparator
Function”.
Displays
Cp HH,, Cp ll
only when
5-level comparator output (
*3
) is
selected.
Cp Hi
Upper limit
Cp lo
Lower limit
Cp ll
Secondary lower limit
dout
Data output
Not displayed
when BCD
output (OP-01)
is installed.
prt
Data output mode
0
Key mode (when stable)
Accepts the PRINT key or external
contact input to output (or store)
data only when the display is
stable.
1
Auto print mode A
(Reference = zero) Outputs (or stores) data when the
display is stable and conditions of
ap-p, ap-b and the reference value
are met.
2
Auto print mode B
(Reference = last stable value)
3
Stream mode /
Interval memory mode
With data 0 , outputs data
continuously; with data 2 , uses
interval memory.
4
Key mode B (instantly)
Accepts the PRINT key or external
contact input to output (or store)
data, regardless of the display
condition.
5
Key mode C (when stable)
Accepts the PRINT key or external
contact input to output (or store)
data, instantly when stable or after
the display is stabilized.
Factory setting
*2 This item is not displayed for the AD-4212B series balance or when BCD output (OP-01) is installed.
*3 AD-4212A series balance: when OP-04 is installed
AD-4212B series balance: when “
Cp-t
” is set to “
1
”