15
MORE HELPFUL HINTS
1.
A l w a y s line up y our p r i n t area b e f o r e y ou feed y our f o i l . This m a k e s it
easy to line up y our p r o d u c t with the t y p e h e a d .
2.
Always do a test print on scrap paper to check the spelling and set up.
3.
After you have put your typeholder into the typehead to get hot, but before you start
printing remove the typeholder and retighten the screws. Thus will help keep your text
from falling out of the holder.
4.
When you have finished a print job, remove the typeholder from the typehead and loosen
the screws so the type can cool under no pressure. This will help your type last longer
and help stop elongating of the type.
5.
Always fill the typeholder completely with spacers. Do not leave empty space in the
typeholder Heat will not get to all areas of the typeholder if there are air spaces. .
6.
When using an open chase typeholder. use 72 pt spacers to fill in the big areas. This will
make set up very fast. AAmstamp offers special aluminum bar and block spacers for this
purpose.
TECHNICAL SUPPORT
If you cannot get a print to come out and you have already tried changing the
temperature, pressure, dwell, and/or cushion boards, call customer service at
(
888
)
375-8375
.
Our staff will be happy to help you in
any way
we can!
Summary of Contents for AAMStamp Sprite
Page 1: ...AAMStamp Sprite Stamping Machine Instruction Manual ...
Page 19: ......
