Aamstamp AAMStamp Sprite, Instruction Manual

Page: 18 / 20

17
Parts List
Part Name Part Number
Manufacture/Supplier
Certifications
Casting 6805-1010 Enco Mfg
Control Box AA0048 Aamstamp Machine
Temperature Control
Unit 5502-350 Infinsys 240V 15 Amp
UL, CSA
Indicator Knob 50-193 Digi -key RoHS
Fuse Holder F006-ND Digi -key
250 Volts, 15 Amps
CE,UL,CSA
Fuse, Type 216 2
Amp Slow Blow 0216010.VXP Littelfuse 250 Volts, 2 amps
UL, CE
NL67WL3G
LED Indicator Lamp Digi -key 230 Volts,
CE,CSA,UL
Power Cord 1447K13 McMaster-Carr 250 Volts, 10Amps
CE, VDE, HAR
Heater, 230v 250 Watt HR37050JE Marathon Heater CE, CSA
Machine Foot 9540K61 McMaster-Carr RoHS
Handle AA0024 Aamstamp Machine
Specifications
EN 60335-1:2012
Electrical Requirements.......... EU 230Volt~50Hz/ USA 120V/60Hz
Power Consumption......................................................... 250Watts
Weight .........……….................…………………….. 16 Kg (36 Lbs.)
Volume…….....................…………….………… .078m³ (2.75 cu/ft)
Operating Enviorment............................................................ IP41
Operating Environment.
This equipment will operate in ambient temperatures of +4ºC to +45ºC (USA 39ºF-113ºF) This
equipment will operate correctly within an environment at 50% RH at 45C(113ºF). Higher RH
may may be allowed at lower temperatures.
Measures shall be taken by the purchaser to avoid the harmful effects of occasional
condensation.
This equipment will operate correctly up to 2000m above mean sea level.
This equipment will operate in a normal office type Pollution Degree 2 enviornment.
The main components in this equipment are designed to work at +/- 10% of the marked rating.