14
PRINTING PENCILS
Attach the pencil attachment to your gauge bar using the black thumb screw
provided with the pencil attachment. Attach the gauge bar to the table plate.
Insert the line up slug into a single line typeholder and bring the machine handle
down slowly so that the line up slug fits in the center of the pencil attachment.
Tighten the gauge bar to secure the pencil attachment. Remove the
typeholder with the line up slug and insert the typeholder with text.
Pencil Alignment Slug
Pencil Guide
ADJUSTING THE TYPEHEAD STARTING HEIGHT
Ram Bar
The Sprite has a 3 1/2 inch head height to accommodate a large range of products.
In order to maximize efficiency for your application, you may want to lower the
typehead to reduce the amount of distance you need to pull the handle. To do this you
simply move the pin shown in the diagram below, which will control the starting height
of the typehead. When making this adjustment you can slide the machine handle from
one side to the other in order to set the machine handle to the most ideal starting
position.
Handle Adjustment Screw
Type Head Stop Pin
Adjustment Holes
Machine Handle
Summary of Contents for AAMStamp Sprite
Page 1: ...AAMStamp Sprite Stamping Machine Instruction Manual ...
Page 19: ......
