Aaeon EMB-Q87B, Manual

Page: 28 / 44

EMB-Q87B
2-20
11. Serial ATA 6.0Gb/s connector (7-pin SATA6G_1~SATA6G_4)
ThIS connector connects to Serial ATA 6.0 Gb/s hard disk drives via Serial
ATA 6.0 Gb/s signal cables.
NOTE:
When using hot-plug and NCQ, set the SATA Mode Selection item in
the BIOS to [AHCI]. See section 3.3.6 SATA Configuration for details.
12. Minicard connectors
Use these connectors to connect a Minicard device.
NOTE: The Minicard device is purchased separately.
EMB-Q87B SATA 6.0Gb/s connectors
SATA6G_4
GND RSATA_RXP4 RSATA_RXN4 GND RSATA_TXN4 RSATA_TXP4 GND
SATA6G_3
GND RSATA_RXP3 RSATA_RXN3 GND RSATA_TXN3 RSATA_TXP3 GND
SATA6G_2
GND RSATA_RXP2 RSATA_RXN2 GND RSATA_TXN2 RSATA_TXP2 GND
SATA6G_1
GND RSATA_RXP1 RSATA_RXN1 GND RSATA_TXN1 RSATA_TXP1 GND
EMB-Q87B Minicard connectors
MINICARD2
MINICARD1
13. SPI flash programmable connector (8-pin SPI_1)
Use this connector to flash BIOS SPI ROM.
EMB-Q87B SPI flash programmable connector
PIN 1
SPI_1
(NC)
SPI_MOSI
SPI_CLK
GND
(NC)
SPI_MISO
SPI_CS#
+3V_SPI