3-10
EMB-Q170C
Select Screen
Select Item
Enter: Select
+/- Change Opt.
F1 General Help
F2 Previous Values
F3 Optimized Defaults
F4 Save & Exit
ESC Exit
Version 2.17.1255 Copyright (C) 2016, American Megatrends, Inc.
Set Administrator
Password
Password Description
If ONLY the Administrator’s password is set,
then this only limits access to Setup and is
only asked for when entering Setup.
If ONLY the User’s passwork is set, then this
is a power on password and must be entered to
boot or enter Setup. In Setup then User will
have Administrator rights.
The password length must be
in the following range:
Minimum length
3
Maximum length
20
Administrator Password
User Passwrod
Aptio Setup Utility - Copyright (C)2016 American Megatrends, Inc.
Main Advanced Chipset
Security
Boot Save & Exit
3.5.1
Administrator Password
If you have set an administrator password, we recommend that you enter the
administrator password for accessing the system. Otherwise, you might be able to
see or change only selected fields in the BIOS setup program.
To set an administrator password:
1. Select the Administrator Password item and press <Enter>.
2. From the Create New Password box, key in a password, then press <Enter>.
3. Confirm the password when prompted.
Primary IGFX Boot Display [VBIOS Default]
Select the Vedio Device which will be activated during POST. Your selection
does not take effect if you have installed an external graphics device.
Secondary boot display selection will appear based on your selection. VGA
modes can be supported only on the primary
3.4.2
PCH-IO Configuration
HD Audio [Auto]
Allows you to control the detection of the high-definition audio device.
Configuration options: [Auto] [Disabled] [Enabled]
PCIEx4 (M.2 Slot) Speed [Auto]
Allows you to select the PCIEx4 card speed. Configuration options: [Auto] [Gen1]
[Gen2] [Gen3]
3.5
Security menu
The Security menu items allow you to change the system security settings.
