3-8
EMB-Q170C
3.3.7
USB Configuration
The USB Devices item lists auto-detected values. If no USB device is detected,
the item shows None.
Legacy USB Support [Enabled]
[Enabled]
Enables the support for USB devices on legacy operating
systems (OS).
[Disabled]
USB devices are only available when running BIOS Setup.
[Auto]
Allows the system to detect the presence of USB devices
3.3.8
Power Management
Power Mode [ATX Type]
Select power supply mode. Configuration options: [ATX Type] [AT Type]
Restore AC Power Loss [Always Off]
[Always Off]
The system goes into off state after an AC power loss.
[Always On]
The system goes into on state after an AC power loss.
[Last State]
The system goes into either off or on state, whatever the
system state was before the AC power loss.
RTC wake system from S5 [Disabled]
[Disabled]
Disables system wake up from S5.
[Fixed Time]
The system will wake up at the specified hr::min::sec.
Configuration options: [Disabled] [Enabled] .
[Dynamic Time]
The system will wake up at the current time plus a specified
number of minutes.
The following items appear when RTC wake system from S5 is set [
Fixed
Time
].
Wake up day/hour/minute/second [0]
Specify the values for day/hour/minute/second.
The following items appear when
Wake System with Dynamic Time
is
enabled.
Wake up minute increase [1]
Specify the number of minutes added to the current time before waking up
system.
