Check Valves
Two check valves are available for the ozone delivery system. One where the ozone tubing
attaches to the ozone generator and one where it attaches to the injector. The purpose of
these check valves is to prevent water from backing up into the ozone generator. The PTFE
ozone delivery line(s) should be inspected daily to ensure water is not flowing back into the
ozone generator. Check valves should be replaced yearly.
NOTE
: The only time it is possible for water to flow back toward the ozone generator is
during a system shutdown. Always inspect for water seepage during this time.
Fuses
Fuse is located on the panel at the bottom of the unit. The fuse is 3 AMP for SP-3G to SP-8G
and 6 AMP for SP-16G.
18