6.8 Inverter start-up
6.9 Inverter Switch Off
50Hz.
breaker.
8. Enter the settings page, default password is '0000', select START / STOP and set it to
start (long press “enter” to quickly go to the START / STOP page).
Please refer to the following steps to switch off the inverter.
• When starting the inverter for the first time, the country code will be set by
default to the local settings. Please check if the country code is
Please refer to the following steps to start up the inverter.
1. Ensure the inverter fixed well.
1. Enter the settings page, select START / STOP and set it to stop.
GRADE
2. Turn off the PV/DC switch (for hybrid only), AC breaker,
2. Make sure all the DC wirings and AC wirings are completed.
correct.
EPS breaker and battery breaker.
3. Make sure the meter is connected well.
• Set the time on the inverter using the button or by using the APP.
3. Wait 5 minutes before you open the upper lid (if in need of repair).
4. Make sure the battery is connected well.
• The internal bypass relay is closed by default, if it needs to be opened, enter
the setting page, select “Internal”.
• EPS function is off by default, if it needs to be opened, enter the setting page,
select EPS “ON/OFF”, default eps voltage/frequency is 230V and
5. Make sure the external EPS contactor is connected well (if needed).
6. Turn on the PV/DC switch (for hybrid only), AC breaker, EPS breaker and battery
Page 82
atx009en0823
Machine Translated by Google
