5.2 Fasten the solar charge controller
5.3 Connecting connections
operation manual
02/2022
page 19
Explosion Hazard: There is a risk of fire or explosion if the battery terminals or cables
are shorted.
WARNING:
The PV module can exhibit open circuit voltages of more than 100 V when exposed
to sunlight. Watch out for this hazard.
First, drill the 4 mounting holes according to the installation positions in “5. Device description”
on the wall.
The inside temperature is automatically displayed if no solar charge controller is
connected. An inverter must always be mounted directly on the battery, never on the
load terminals of the solar charge controller.
WARNING:
DANGER:
Then attach the solar charge controller to the pre-drilled holes.
MPPT Solar Charge Controllers A100/20, A100/40, A150/60
Machine Translated by Google
