A-PLUS AUTOMATION A44-P, Instruction Handbook Manual

Page: 6 / 32

6
A44-P
2. MACHINE DESCRIPTION
2.1 GENERAL MACHINE DESCRIPTION
The A44-P Frame Assembling Machine have been realized to assemble any kind of frame.
The machine versions is equipped with a Wedges driver blade mounted on a movable carriage which, manually shifted by
the operator allows the quick insertion of Wedges in different positions.
The A44-P being of simple construction and extremely easy to use, make them possible to join with absolute precision any
kind of moulding by means of special steel A+ wedges.
2.2 CONSTRUCTIVE CONFIGURATION
The main components constituting the machines are:
• Frontal clamping device to have a perfect joint
• Brake on position to insert easily intermediate Wedges in any profile
• Pneumatic balancing that allows to work easily when the working bench is tilted
• Adjustable tilting fences.
• Floor stand
• Fixed and magnetic changeable pressure pads to have the proper clamping of any profile
• Dual functions foot operating pedal for separate control of clamping and nail insertion
• Pneumatic opening of wedges magazine for a very quick reloading
• Nail heads sizes 7, 10 and 15 mm.
2.3 AXIS
- X AXIS
Movement horizontal.
- Y AXIS
Movement vertical
Picture 2.3.A - Movement directions
2.4 AMBIENT CONDITIONS IN THE INSTALLATION AREA
The installation area must have adequate environmental conditions.
The installation area must meet the following requisites.
• Adequate lighting to European standards (recommended 250÷650 lux)
• Well ventilated rooms
• Adequate relative humidity and temperature. The permitted temperatures go from 5° to 40° C, with a humidity level not
higher than 50% at 40° C or 90% at 20° C.
• The floor, as well as having an adequate load capacity for the machine weight, must be stable and levelled in order to
guarantee a correct support.
X
Y