
4
A44-P
1. GENERAL INFORMATION
The identification plate illustrated is affixed directly onto the machine. The plate contains all identification details and indications
necessary for safe operation.
1.2 TECHNICAL SERVICE REQUEST PROCEDURES
For any requirement, please contact the Manufacturer’s Customer Service.
For any request for technical service, list the data on the identification plate, the approximate number of hours the machinery
has been used and the type of malfunction.
1.3 CERTIFICATION
The machine is produced in conformity to the pertinent European Community Norms in force at the moment of its introduction
on the market.
1.4 WARRANTY
• The replacement of defective parts is warranted (counting from the date written on the delivery bill) for a period of:
• Mechanical components - 24 months
• Pneumatic parts - 12 months
• Electric and Electronic parts - 12 months
The driver blade is tested for about 1.000.000 working cycles.
The warrant does not include sending technical staff. The repair will be performed at A-Plus Automation's facility and the
freight of shipment will be entirely charged to the Customer.
The warranty does not cover the damages caused by an inappropriate use of the machine or not corresponding to the
instructions described in this handbook.
The warranty decays in case of unauthorized modifications or because of accidental damages or tampering performed by
unqualified personnel.
The warranty also decays if you use wedges different from the original special steel A+ ones.
To take advantage of warranty services it is necessary, at the moment you receive your machine to completely fill out the
warranty card and send back as soon as possible to A-Plus Automation.
The warranty will be valid after it is received & recorded at A-Plus Automation.
1.5 PRE-ARRANGEMENTS CHARGED TO THE CUSTOMER RESPONSIBILITY
It is the customer’s duty, on times agreed with the producer, to execute what is indicated in the following documentation.
Things normally charged to the customer:
• Premises predisposition, included building works
• Pneumatic supply of compressed air (see at the paragraph 4.6.1)
• Machine power supply, observing the current norms of Country where the machine is installed (see at the paragraph 4.6.2)
1.6 PURPOSE OF THE MANUAL
The manual herein, part and parcel with the machinery, has been designed and built by the manufacturer with the purpose
to supply the necessary information to the persons authorized to operate the machinery during its useful life.
As well as adopting an appropriate utilization technique, the recipients of the information must read and strictly apply them.
This information is supplied by the manufacturer in its own language (Italian) and may be translated into other languages to
satisfy statutory and/or sales needs.
A little time dedicated to the study of this information, will permit the user to avoid health and safety risks to personnel and
economic loss.
The translation in the language of the country of use, supplied by the manufacturer, its representative or whoever brings
the machine to such linguistic area, must be carried out from the “ORIGINAL INSTRUCTIONS” and must display the phrase
“TRANSLATION OF THE ORIGINAL INSTRUCTIONS”.
Summary of Contents for A44-P
