A.O. Smith LILY, User Manual

Page: 17 / 56

ENG 15
LED Display Functions
1st
PP 2nd
CB
3rd
RO 4th
PAC
Work: When the machine is producing water, this icon will lit up.
Source: When the machine has no inlet water or the inlet water is not
enough, this icon will lit up and the alarm will buzz.
Flush: When the unit is flushing the membrane, this icon will lit up.
Leakage: When there is a water leakage, this icon will lit up and the alarm
will buzz.
UV: This icon indicates the remaining life of UV Lamp.
Replace: These icons will be lit when one of the filters need to be replaced.
1st PP: This icon indicates the remaining life of 1st stage Sediment Filter.
2nd CB: This icon indicates the remaining life of 2nd stage Carbon Block
Filter.
3rd RO: This icon indicates the remaining life of 3rd stage RO Membrane
Filter.
4th PAC: This icon indicates the remaining life of 4th stage Post Active
Carbon Filter.
Work
• This icon will lit up only when the unit is producing
water.
• When the unit is in standby mode, this icon will be off.
Flush
• This icon will lit up only when the unit is flushing the RO
membrane.
• When the unit is in standby mode, this icon will be off.
Source
• When the machine has no inlet water or the inlet water
is not enough, this icon will lit up in red color and the
alarm will buzz..
• Alarm will buzz 7 times, after the buzzing, alarm will be
off and this icon will blink on the display.
• Alarm will buzz 7 times only once but everytime when
the water cut, the alarm will buzz again.
• This function and alarm will be activated when water is
cut no matter the unit is treating water or in standby.
Leakage Sensor and Alarm
• When there is a water leakage inside the unit, solenoid
valve will cut the water and leakage alarm will be
activated. .
• When Leakage Alarm is activated this icon will be
blinking in red color and alarm will buzz in each 2
seconds continuously.
• Alarm can be off only when the power source is the
unit is cut and reconnected to power again.
• Leakage alarm will be activated and the inlet water
will be automatically cut off no matter the unit is
treating water or in standby.